February 25, 2017

Flash/Unbrick Stock Rom Lenovo K6 Power | Lenovo K6 Power Flashing

Lenovo K6 Power Stock Rom Download | Flashing
Today we are going to show you how to flash stock rom on Lenovo K6 Power.
Download Lenovo K6 Power Stock Rom :


Requirement Before Flashing :
1. Make sure your Device is charged atleast 25%
2. Make sure to Install USB Driver before flashing.

Flashing Instructions :
WATCH OUR STEP BY STEP FLASHING VIDEO GUIDE 



------------------------------------------------------------------------------------------------

How to Unbrick Lenovo K6 Power :
In Case if your device is bricked ( not able to turn on or it is in bootloop condition ) then do this :
1. Remove SimCard from your device
2. Watch our step by step Flashing Video
3. Put Simcard Back into the device
4. That's it.

------------------------------------------------------------------------------------------------

Facing Problem in Connecting Your Device ?
- Extract the stock rom file you will find a folder named as Driver, just open it and install Qualcomm_USBDriver_Full_2.2.0.0_Setup.exe file. 
- Now Turn off Your device and wait 5-6 Seconds untill your device is completely Turned Off
- Now Press and Hold Volume Up and Down Button together , while holding Volume Up and Down Connect your device to Computer using USB Cable.
Note * if volume up and down button didn't worked for you, hold volume up button and connect your device using usb cable.

------------------------------------------------------------------------------------------------

Help & Support :
If you face any problem you can contact to us through our facebook page :