July 26, 2014

INSTALL-CLOCKWORKMOD-CWM-RECOVERY-AT&T-GALAXY S3-SGH-I747

HOW TO INSTALL CLOCKWORKMOD RECOVERY ON AT&T Galaxy S3 SGH-I747
Today we are going to show you how you can install ClockWorkMod Recovery on your AT&T Galaxy S3 SGH-I747 by following simple step by step instructions. The process is very simple and takes only few minutes to install CWM Recovery on your AT&T Galaxy S3 SGH-I747 smartphone.

After installing CWM recovery on your device you can install custom roms , scripts , mods and can make a full backup of your rom too.

INSTALL-CWM-RECOVERY-AT&T-GALAXY S3
ClockWorkMod (CWM) Recovery Galaxy S3 SGH-I747:

This guide is only for Galaxy S3 SGH-I747. Don’t try this method on any of other Android devices, It may hard brick your device. if you found any difficulty or needed any help/advice in rooting your device you can comment down below the post.

STEP BY STEP INSTRUCTIONS :

STEP 1: Download AT&T Galaxy S3 SGH-I747 Recovery file from the link below:
File Name : CWM-Recovery-LTE-SGS3-v5.tar.md5
Size : 6.3 mb
CLICK HERE TO DOWNLOAD

STEP 2: Download Odin v3.09 from the link below and Extract/Unzip using 7zip or you can use Winrar also :
File Name : Odin3_v3.09.rar
Size : 800 kb
CLICK HERE TO DOWNLOAD

STEP 3: Now move all files in a single folder just to make everything clean and simple.

INSTALL-CWM-RECOVERY-AT&T-GALAXY S3


STEP 4: Disconnect Galxy S3 from PC if it is connected.

STEP 5: Now Open Odin v3.09.exe file by Double Click on it.

INSTALL-CLOCKWORKMOD-CWM-RECOVERY-AT&T-GALAXY S3


STEP 6: Now Boot your AT&T Galaxy S3 SGH-I747 into Download Mode
Power off your phone first and wait for 6-7 seconds after display is off.
Now Press and hold these 3 buttons Volume Down + Power + Home together until you see Warning! screen:
Press Volume Up now to continue to Download Mode

download mode-at&t-samsung-galaxy-s3-i747


STEP 7: Connect your AT&T Galaxy S3 SGH-I747 to PC. Odin window will show an Added!! message in bottom left box. Odin’s screen would look like this:

INSTALL-CWM-RECOVERY-AT&T-GALAXY S3


STEP 8: Now Load the Recovery file in Odin as instructed below :
Click on the AP button on Odin and select the CWM-Recovery-LTE-SGS3-v5.tar.md5 file . Your Odin window should look something like the screenshot below:

INSTALL-CWM-RECOVERY-AT&T-GALAXY S3-SGH-I747


STEP 9: Now in the Option section of Odin, make sure that Re-Partition box is unchecked. (Auto Reboot and F. Reset Time boxes remain checked, while all other boxes remain unchecked.)

INSTALL-CWM-RECOVERY-AT&T-GALAXY S3-SGH-I747


STEP 10: Click the Start button to begin flashing recovery file on your AT&T Galaxy S3 SGH-I747, installation process taken few minutes to complete.

CWM-RECOVERY-AT&T-GALAXY S3-SGH-I747


STEP 11: When you get PASS! message in Odin, your phone will restart automatically. You can then disconnect your phone from PC.

CWM-RECOVERY-AT&T-GALAXY S3-SGH-I747


STEP 12: Once you get the Samsung logo on the home screen, you can unplug the device from the computer and close Odin.

Thats all :)

Your AT&T Galaxy S3 SGH-I747 has now been flashed with ClockworkMod Touch Recovery . To enter recovery mode, shut down phone and then hold down the Home + Volume Up buttons and press the Power button for about 5 seconds to enter Recovery Mode.

If this guide worked for you then please leave a comment below, this will help the fellow AT&T Galaxy S3 SGH-I747 users.