July 25, 2014

INSTALL CLOCKWORKMOD RECOVERY ON GALAXY S3-I9300

HOW TO INSTALL CLOCKWORKMOD RECOVERY ON GALAXY S3 I9300
Today we are going to show you how you can install ClockWorkMod Recovery on your GALAXY S3 I9300 by following simple step by step instructions.The process is very simple and takes only few minutes to get the CWM Recovery access on your GALAXY S3 I9300 smartphone.

After installing CWM recovery on your device you can install custom roms , scripts , mods and can make a full backup of your rom too.

install-clockworkmod-recovery-on
ClockWorkMod (CWM) Recovery GALAXY S3-I9300:

This guide is only for GALAXY S3-I9300 . Don’t try this method on any of other Android devices, It may hard brick your device. if you found any difficulty or needed any help/advice in rooting your device you can comment down below the post.

STEP BY STEP INSTRUCTIONS :

STEP 1: Download Galaxy S3 I9300 Recovery file from the link below:
File Name : recovery-cwm-touch-6.0.1.2-i9300.tar
Size : 6 mb
CLICK HERE TO DOWNLOAD

STEP 2: Download Odin v3.09 from the link below and Extract/Unzip using 7zip or you can use Winrar also :
File Name : Odin3_v3.09.rar
Size : 800 kb
CLICK HERE TO DOWNLOAD

STEP 3: Now move all files in a single folder just to make everything clean and simple.

install-clockworkmod-recovery-on-galaxy s3-i9300


STEP 4: Disconnect Galxy S3 from PC if it is connected.

STEP 5: Now Open Odin v3.09.exe file by Double Click on it.

install-clockworkmod-recovery-on-galaxy s3-i9300


STEP 6: Now Boot your Galaxy S3 i9300 into Download Mode
Power off your phone first and wait for 6-7 seconds after display is off.
Now Press and hold these 3 buttons Volume Down + Power + Home together until you see Warning! screen:
Press Volume Up now to continue to Download Mode

galaxy s3-download mode


STEP 7: Connect your Galaxy S3-I9300 to PC. Odin window will show an Added!! message in bottom left box. Odin’s screen would look like this:

install-clockworkmod-recovery-on-galaxy s3-i9300


STEP 8: Now Load the Recovery file in Odin as instructed below :
Click on the AP button on Odin and select the recovery-cwm-touch-6.0.1.2-i9300.tar file . Your Odin window should look something like the screenshot below:

install-cwm-recovery-on-galaxy s3-i9300

STEP 9: Now in the Option section of Odin, make sure that Re-Partition box is unchecked. (Auto Reboot and F. Reset Time boxes remain checked, while all other boxes remain unchecked.)

install-cwm-recovery-on-galaxy s3-i9300


STEP 10: Click the Start button to begin flashing recovery file on your Samsung Galaxy S3-I9300 , installation process taken few minutes to complete.

how-to-install-cwm-recovery-on-galaxy s3-i9300


STEP 11: When you get PASS! message in Odin, your phone will restart automatically. You can then disconnect your phone from PC.

how-to-install-cwm-recovery-on-galaxy s3-i9300


STEP 12: Once you get the Samsung logo on the home screen, you can unplug the device from the computer and close Odin.

Thats all :)

Your Samsung Galaxy S III has now been flashed with ClockworkMod Touch Recovery 6.0.12. To enter recovery mode, shut down phone and then hold down the Home + Volume Up buttons and press the Power button for about 5 seconds to enter Recovery Mode.

If this guide worked for you then please leave a comment below, this will help the fellow Galaxy S3 I9300 users.