July 30, 2014

DOWNLOAD/INSTALL ANDROID 4.4.2 KITKAT ON GALAXY TAB PRO 10.1 T520

DOWNLOAD/INSTALL ANDROID 4.4.2 KITKAT UPDATE ON GALAXY TAB PRO 10.1 T520
Today we are going to show you how you can install android 4.4.2 kitkat update on your Galaxy TAB PRO 10.1 T520 by following simple step by step instructions.The process is very simple and takes only few minutes to install kitkat 4.4.2 update on your smartphone.

DOWNLOAD ANDROID 4.4.2 KITKAT UPDATE  GALAXY TAB PRO 10.1 T520
Install Android 4.4.2 Update on Galaxy Tab Pro 10.1 T520 

This guide is only for Galaxy TAB PRO 10.1 T520. Don’t try this method on any of other Android devices, It may hard brick your device. if you found any difficulty or needed any help/advice in updating your device you can comment down below the post.

Before you begin with the instructions below :

1.Make sure your android device is adequately charged — at least 50% battery of the device.

2.Check Device Model No — It must be T520

3.Backup Your Device — Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.

4.Install Latest Driver — You must have proper and working driver installed on your windows computer to be able to successfully update your Samsung Galaxy TAB PRO 10.1 T520.
CLICK HERE TO DOWNLOAD USB DRIVER

STEP BY STEP UPDATE INSTALL GUIDE :

STEP 1: Download and Extract the firmware file :  T520XXUANG1_T520XSAANG1_XSA.zip on your computer (we recommend you to use 7zip or Winrar for extracting file )
File Name : T520XXUANG1_T520XSAANG1_XSA.zip
Size : 1.21 Gb
CLICK HERE TO DOWNLOAD

STEP 2: Now Download Odin zip file  and Extract it on your computer.
File Name : Odin3_v3.09.rar
Size : 800 kb

CLICK HERE TO DOWNLOAD

You will get the following files after extracting :

DOWNLOAD ANDROID 4.4.2 KITKAT UPDATE  GALAXY TAB PRO 10.1 T520


STEP 3: Disconnect the Galaxy TAB PRO 10.1 T520 from PC if it is connected.

STEP 4: Double-click the Odin3 v3.09.exe file to open Odin.

INSTALL ANDROID 4.4.2 KITKAT UPDATE  GALAXY TAB PRO 10.1 T520

STEP 5: Boot your Galaxy TAB PRO 10.1 T520 into Download Mode
Power off your phone device.
Press and hold these 3 Volume Down + Power + Home buttons together until you see Warning! screen
Press Volume Up now to continue to Download Mode

DOWNLOAD MODE GALAXY TAB PRO 10.1 T520

STEP 6: Connect your Galaxy TAB PRO 10.1 T520 to PC. Odin window will show an Added!! message in bottom left box. Odin’s screen would look like this:

INSTALL ANDROID 4.4.2 KITKAT UPDATE ON GALAXY TAB PRO 10.1 T520

Note * In Case if Odin doesn't show Added Message then here are the possible fix :
1. Make Sure to turn off Samung kies if it is running in the background,
2. Check USB Cable,
3. Make Sure you have installed USB Driver on your windows computer.

STEP 7: Load the firmware file into Odin as instructed below:
Click on the AP button In Odin and select the firmware file with the extention : tar.md5 file . Your Odin window should look something like the screenshot below:

INSTALL ANDROID 4.4.2 KITKAT UPDATE ON GALAXY TAB PRO 10.1 T520

STEP 8: Now in the Option section of Odin, make sure that Re-Partition box is unchecked. (Auto Reboot and F. Reset Time boxes remain checked, while all other boxes remain unchecked.)

DOWNLOAD KITKAT UPDATE ON GALAXY TAB PRO 10.1

STEP 9: Now click on the Start button in ODIN to begin flashing stock firmware on your Galaxy TAB PRO 10.1 T520. Installation process will take a few minutes to complete.

ANDROID-4.4.2-KITKAT-UPDATE-GALAXY TAB PRO 10.1-T520

STEP 10: When you get PASS! message in Odin Window, your phone will restart automatically. You can then disconnect your phone from PC.

ANDROID-4.4.2-KITKAT-UPDATE-GALAXY TAB PRO 10.1-T520

STEP 11: Once you get the Samsung logo on the home screen, you can unplug the device from the computer and close Odin.

Note * In Case if you see a FAIL message instead of the PASS in Odin’s :
Disconnect your Galaxy TAB PRO 10.1 T520 from PC, close Odin, remove phone’s battery and put it back inside in 5-6 seconds, open Odin and then repeat from Step 4 of this guide again.

Also, If you device is Stuck on any other process :
Disconnect your Galaxy TAB PRO 10.1 T520 from PC, close Odin, remove phone’s battery and put it back inside in 5-6 seconds, open Odin and then repeat from Step 4 of this guide again.

Thats all :)..You have Successfully Installed Android 4.4.2 Kitkat Update on Samsung Galaxy TAB PRO 10.1 T520.

If this guide worked for you then please leave a comment below, this will help the fellow Galaxy TAB PRO 10.1 T520 users. 

=> Frequently Asked Questions and Answers

1. Does it Effect Galaxy TAB PRO 10.1 T520 Warranty ?
No it will not effect your Galaxy TAB PRO 10.1 T520 Warranty.

2.It is safe ?
Yes

3.Odin Show Reset message instead of Pass?
Odin Shows Reset Message dont worry sometimes it show reset button instead of pass.