July 28, 2014

DOWNLOAD/INSTALL ANDROID 4.4.4 KITKAT UPDATE ON GALAXY S2 I9100

ANDROID 4.4.4 KITKAT UPDATE ON GALAXY S2 I9100 BY DIRTY UNICORNS ROM
Today we are going to show you how you can install android 4.4.4 kitkat update on GALAXY S2 I9100 using DIRTY UNICORNS ROM by following simple step by step instructions.The process is very simple and takes a few minutes to install android 4.4.4 kitkat update on your GALAXY S2 I9100 smartphone.

download-android-4.4.4-update-on-galaxy-s2-i9100

Android 4.4.4 on Galaxy S2 I9100

This guide is only for Galaxy S2 I9100 . Don’t try this method on any of other Android devices, It may hard brick your device. if you found any difficulty or needed any help/advice in updating your device you can comment down below the post.

Before you begin with the instructions below :

1.Make sure your android device is adequately charged — at least 50% battery of the device.

2.Check Device Model No — It must be I9100

3.Backup Your Device — Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.

4.Root and Recovery — Your device must be rooted and ClockWorkMod (CWM) Recovery must be installed on your device.

STEP BY STEP ANDROID 4.4.4 INSTALL GUIDE :


STEP 1: Download Android 4.4.4 Kitkat Update and Gapps by DIRTY UNICORN ROM.
File Name : du_i9100_4.4.4_20140626-0810.zip
Size : 171 mb
CLICK HERE TO DOWNLOAD

File Name :gapps-kk-20140105-signed.zip
Size : 83.14 mb
CLICK HERE TO DOWNLOAD


STEP 3: Move the du_i9100_4.4.4_20140626-0810.zip and gapps-kk-20140105-signed.zip file into Sdcard ( External storage ).

STEP 4: Now Disconnect the Samsung Galaxy S2 I9100 from PC if it is connected.

STEP 5: Now Boot into Recovery Mode . To Boot into recovery mode follow the steps :
1.Power off your phone first and wait for 6-7 seconds after display is off
2.Press and hold Volume Up + Power + Home Buttons together for 5 - 8 seconds

recovery mode-galaxy-s2-i9100


STEP 6: In Recovery Mode Choose Wipe Data/Factory Reset option and on next screen select Yes option if asked.
Note * Use Volume Up and Volume Down Button to scroll up and down. For selecting an option use Power Button

4.4.4 KITKAT UPDATE ON GALAXY S2 I9100


STEP 7: Now perform  a Wipe Cache Partition by selecting wipe cache option in cwm recovery.

4.4.4 KITKAT UPDATE ON SAMSUNG GALAXY S2 I9100


STEP 8: Now go back to the main recovery screen and Select the Option Install Zip From SD Card.

ANDROID 4.4.4 KITKAT UPDATE ON GALAXY S2 I9100


STEP 9: Now select choose zip from sdcard option as shown below and select the du_i9100_4.4.4_20140626-0810.zip file by pressing power button .

INSTALL ANDROID 4.4.4 KITKAT ON GALAXY S2 I9100


STEP 10: Once Completed Reboot your device by selecting reboot option from the main recovery screen. as shown below :

INSTALL ANDROID 4.4.4 KITKAT UPDATE ON GALAXY S2 I9100


STEP 11: Now again Boot into Recovery Mode.

STEP 12: From the main recovery screen Select the Option Install Zip From SD Card.

STEP 13: Now select choose zip from sdcard option and select the gapps-kk-20140105-signed.zip file by pressing power button .

STEP 14: Once Completed Reboot your device by selecting reboot option from the main recovery screen


That's All... :)...You have successfully installed Android 4.4.4 update by Dirty Unicorn Rom on you Galaxy S2 I9100.

SPECIAL THANKS TO THE DIRTY UNICORNS DEVELOPERS :)